The DR® PRO XL330 Leaf and Lawn Vacuum is a high-capacity tow-behind vacuum designed for larger properties and heavier lawn cleanup. It features a 330-gallon (44 cubic foot) collector, an 800-lb. trailer capacity, and an 11.7 HP DR® OHV engine with electric starting.

The PRO XL330 is designed to collect, reduce, and transport leaves and other lawn debris. Its steel Shark-Teeth™ impeller works with material lifted by the mower deck to further reduce collected debris before it enters the collector.

Product Note: Globe Martio is an independent retailer. This product is manufactured by DR® Power Equipment and is not a Globe Martio-manufactured product. DR®, Shark-Teeth™, and other manufacturer names, trademarks, and product technologies belong to their respective owners.

330-Gallon Collection Capacity

The PRO XL330 collector holds up to 330 gallons, or 44 cubic feet, of material. According to the manufacturer, this provides 37% more collection capacity than the smaller PREMIER 240 model.

The high-capacity collector is designed for larger properties and heavier cleanup tasks, allowing substantial amounts of leaves and other debris to be collected before unloading.

Shark-Teeth™ Steel Impeller

The PRO XL330 uses a steel Shark-Teeth™ impeller to further reduce material collected from the mower deck.

The mower deck first lifts and partially mulches lawn debris before it enters the vacuum system. The Shark-Teeth™ steel impeller then further reduces the material before it reaches the collector.

The all-steel impeller is covered by a Lifetime Warranty, according to the manufacturer.

11.7 HP DR® OHV Engine

The PRO XL330 is powered by an 11.7 HP, 389cc DR® OHV engine with electric starting.

The manufacturer specifies gross torque of 16.90 ft-lbs. in the product description, with another specification listing 19.6 ft-lbs. gross torque per SAE J1940. Because the supplied source contains these differing torque figures, the torque specification should be verified against the manufacturer’s current specifications before publication.

8-Inch Vacuum Hose

The PRO XL330 uses an 8-inch hose. According to the manufacturer, this diameter was selected for performance, with narrower hoses identified as more prone to clogging and wider hoses as having reduced compression and suction power.

800-Lb. Trailer Capacity

The underlying trailer has a stated capacity of up to 800 lbs. With the collector top and power unit detached, the trailer bed can also be used as a utility cart for landscaping and hauling tasks.

The source specifies that the utility cart can be attached to a riding mower or ATV using the pin hitch.

Modular Design

The collector top can be removed and folded up, while the engine rolls away using its built-in trolley. This modular configuration is intended to provide space-efficient storage and year-round versatility.

Utility Cart

When the upper collector and power unit are detached, the trailer bed functions as a utility cart. The PRO XL330 utility cart has an 800-lb. capacity according to the supplied product information.

Large Wheels

The PRO XL330 uses 14-inch-diameter wheels. The manufacturer states that the larger wheels provide a smoother roll.

A Wheel Upgrade Kit is available for converting the machine to a dual-wheel setup.

Trailer Jack Stand

A heavy-duty trailer jack stand is listed for moving the machine when it is not in use. The supplied specifications state that the stand adapts to pin-hitch heights from 8 to 15 inches and has a 4-inch-diameter wheel.

The source identifies the trailer jack stand as an optional accessory.

Optional Accessories

The PRO XL330 supports optional accessories including:

• Vacuum Hose: Provides access to yard waste in areas that cannot be reached with the mower.
• Mulch Discharger: Allows collected debris to be discharged where desired.
• Wheel Upgrade Kit: Converts the wheel configuration to a dual-wheel setup.
• Trailer Jack Stand: Provides support for moving the machine when not in use.

Lawn Tractor Requirements

The PRO XL330 fits most right-side-discharge lawn tractors and zero-turn mowers.

• Recommended Lawn Tractor Power: 17 HP or greater
• Compatible Equipment: Most right-side-discharge lawn tractors and zero-turn mowers

Customers should review the manufacturer’s lawn tractor fitting information to confirm compatibility before ordering.

EPA Certified

The PRO XL330 is listed as EPA Certified in the supplied product specifications.

Assembled in the USA

The PRO XL330 is assembled in the USA using foreign and domestic parts, according to the manufacturer.

Product Specifications

• Product Type: Leaf and Lawn Vacuum
• Model: PRO XL330
• Collector Capacity: 330 gallons / 44 cu. ft.
• Trailer Capacity: 800 lbs.
• Engine: DR® OHV
• Engine Displacement: 389cc
• Engine Output: 11.7 HP
• Starting System: Electric start
• Hose Diameter: 8 inches
• Hitch: Single-point/pin hitch
• Recommended Lawn Tractor Power: 17 HP or greater
• Lawn Tractor Compatibility: Most right-side-discharge lawn tractors and zero-turn mowers
• Wheels: 14-inch diameter
• Jack Stand: Listed as optional
• Certification: EPA Certified
• Weight: 313 lbs.
• Assembly: Assembled in the USA using foreign and domestic parts
• Manufacturer: DR® Power Equipment

Manufacturer Warranty Information

• Machine: 2 years residential; 90 days commercial
• Engine: 2 years residential; 1 year commercial
• All-Steel Impeller: Lifetime Warranty

Warranty coverage is provided by the manufacturer and may be subject to the manufacturer’s applicable warranty terms and conditions.

Available through Globe Martio, the DR® PRO XL330 provides high-capacity collection for larger lawn cleanup applications, with a 330-gallon collector, 800-lb. trailer capacity, and 11.7 HP DR® OHV engine.